ABSTRACT
PurposeThis study aims to focus on the preparation and characterization of the silver nanowire (AgNWs), as well as their application as antimicrobial and antivirus activities either with incorporation on the waterborne coating formulation or on their own.Design/methodology/approachPrepared AgNWs are characterized by different analytical instruments, such as ultraviolet-visible spectroscope, scanning electron microscope and X-ray diffraction spectrometer. All the paint formulation's physical and mechanical qualities were tested using American Society for Testing and Materials, a worldwide standard test procedure. The biological activities of the prepared AgNWs and the waterborne coating based on AgNWs were investigated. And, their effects on pathogenic bacteria, antioxidants, antiviral activity and cytotoxicity were also investigated.FindingsThe obtained results of the physical and mechanical characteristics of the paint formulation demonstrated the formulations' greatest performance, as well as giving good scrub resistance and film durability. In the antimicrobial activity, the paint did not have any activity against bacterial pathogen, whereas the AgNWs and AgNWs with paint have similar activity against bacterial pathogen with inhibition zone range from 10 to 14 mm. The development of antioxidant and cytotoxicity activity of the paint incorporated with AgNWs were also observed. The cytopathic effects of herpes simplex virus type 1 (HSV-1) were reduced in all three investigated modes of action when compared to the positive control group (HSV-1-infected cells), suggesting that these compounds have promising antiviral activity against a wide range of viruses, including DNA and RNA viruses.Originality/valueThe new waterborne coating based on nanoparticles has the potential to be promising in the manufacturing and development of paints, allowing them to function to prevent the spread of microbial infection, which is exactly what the world requires at this time.
ABSTRACT
Introduction: COVID-19 is a disease that is induced by severe acute respiratory syndrome coronavirus (SARS). Its viral infection is spread swiftly around the world and causes many restrictions, health problems, and expensive treatment costs worldwide. Due to its high prevalence and mortality rate, there is a global challenge to find an effective therapeutic protocol for the prevention and treatment of COVID-19. No one could disclaim the immediate need for a standardized protocol for COVID-19 treatment. Methods: Aiming to prepare a comprehensive review of introducing appropriate remedial options for COVID-19, a wide range of investigation on relevant articles established in the English language published through different publications such as PubMed, Medline, Embase, Science Direct, Scopus, and COVID-Evidence . all researchers and clinicians should try to make more precise knowledge about the viral behavior and treatment of COVID-19 to find an effective vaccine to prevent and treatment of this virus. The main objective of the present study is to review and investigate the available evidence for achieving a more precise preventive and treatment protocol to deal with COVID-19. Findings: many available drugs have been reviewed that include Azithromycin, Lopinavir/ritonavir (LPV/r), Remdesivir, Corticosteroids, Chloroquine, Hydroxychloroquine, Hydroxychloroquine sulfate, Immunoglobulin, Ivermectin, Ribavirin, Favipiravir, Interferon. On the other hand, it is recommended to conduct precise clinical trials on current antimicrobial and antiviral agents that are administered for a long time to find an expeditious and effective response to the COVID-19 pandemic. Although disappointing, it should be noted that there is no effective drug regimen or vaccine against the novel coronavirus. In this regard, using other available antiviral drugs for the treatment of COVID-19 may be effective to some extent. In this study, by investigating some available antimicrobial medicines that may diminish COVID-19 infection, we are trying to introduce a general protocol for controlling this disease.
ABSTRACT
The present study aims to provide deeper knowledge about the structural, vibrational, chemical, antimicrobial activity, molecular dynamic simulation and drug likeness of synthesized compound 4-Methoxy-N-(nitrobenzylidene)-aniline. The FT-IR and FT-Raman spectra of 4-Methoxy-N-(nitrobenzylidene)-aniline have been recorded in the powder form in the region 4000–500 cm−1 and 3500–50 cm−1. The vibrational analysis were carried out with the help of normal coordinate analysis (NCA). The molecular geometry, hydrogen bonding interaction and vibrational frequencies have been calculated using the density functional method (DFT/B3LYP) with 6-311 G (D) basis set. The natural bond orbital (NBO), atoms in molecule (AIM), and Hirshfeld surface analysis and RDG were applied to evaluate the relative strength of hydrogen bond interactions and represent their effect on the stabilities of molecular arrangements. Related molecules were compared by computation in order to understand the effect of non-bonded interactions (i.e. intermolecular and intramolecular hydrogen bonding). The HOMO and LUMO analysis was used to determine the charge transfer within the molecule. Furthermore, the in vitro antimicrobial study was carried out for the title compound against Aspergillus niger and Staphylococcus aureus. The antimicrobial activity was confirmed on the compounds with molecular docking (A.niger, S.aureus, Homosapians, Sars-Cov-19 and anticancer) studies and molecular dynamic simulation. The non-linear optical (NLO) properties were also analyzed for the molecules.
ABSTRACT
Two tetranuclear [Zn4Cl2(ClQ)6]·2DMF (1) and [Zn4Cl2(ClQ)6(H2O)2]·4DMF (2), as well as three dinuclear [Zn2(ClQ)3(HClQ)3]I3 (3), [Zn2(dClQ)2(H2O)6(SO4)] (4) and [Zn2(dBrQ)2(H2O)6(SO4)] (5), complexes (HClQ = 5-chloro-8-hydroxyquinoline, HdClQ = 5,7-dichloro-8-hydroxyquinoline and HdBrQ = 5,7-dibromo-8-hydroxyquinoline) were prepared as possible anticancer or antimicrobial agents and characterized by IR spectroscopy, elemental analysis and single crystal X-ray structure analysis. The stability of the complexes in solution was verified by NMR spectroscopy. Antiproliferative activity and selectivity of the prepared complexes were studied using in vitro MTT assay against the HeLa, A549, MCF-7, MDA-MB-231, HCT116 and Caco-2 cancer cell lines and on the Cos-7 non-cancerous cell line. The most sensitive to the tested complexes was Caco-2 cell line. Among the tested complexes, complex 3 showed the highest cytotoxicity against all cell lines. Unfortunately, all complexes showed only poor selectivity to normal cells, except for complex 5, which showed a certain level of selectivity. Antibacterial potential was observed for complex 5 only. Moreover, the DNA/BSA binding potential of complexes 1–3 was investigated by UV-vis and fluorescence spectroscopic methods.
ABSTRACT
COVID-19 had been declared a pandemic in March 2020. The disease has caused destruction all around the world. Symptomatic treatment, supportive care, isolation and experimental measure are the most important ways to manage this disease. However, 81% of the COVID-19 patients showed mild-to-moderate symptoms such as fever, cough, nasal congestion, fatigue, sore throat, loss of smell and loss of taste etc. Patients with mild-to-moderate symptoms may not need hospitalization because most of them will be able to manage their sickness at home through medication or supportive care. It will be useful to take both preventive measures and substances that boost the immunity while rest at home. Ministry of AYUSH in India recommended several approaches for preventive health care to boost immunity and respiratory health: following yoga and meditation plus intake of a few medicinal-plant-based compounds such as those from turmeric (Curcuma longa), cumin (Cuminum cyminum) and coriander (Coriandrumsativum) etc., once or twice a day. C. longa has been one of the most commonly used remedy for symptoms during COVID-19 pandemic in India. Based on existing scientific evidences, C. longa has been proved to be a potent anti-microbial, anti-inflammatory, immunomodulatory and antioxidant source, as well as a medicinal plant effective for respiratory disorders. In this review, scientific evidence of C. longa phytochemicals responsible for pharmacological activities are presented using in silico, in vitro and in vivo models. This review also discusses the disease COVID-19 and its causative virus SARS-CoV-2.
ABSTRACT
The coronavirus disease 2019 pandemic has shown that a disposable surgical face mask is a good protective wall against infection due to its ability to prevent virus transmission from sick to healthy people. Nevertheless, these surgical masks are disposable, not ecofriendly, and are single-use items. The use and disposal of traditional masks lead to high secondary risks such as environmental pollution, pathogen transmission, overload demands, and user discomfort. Nanotechnology is one of the most investigated strategies to safely and economically reuse masks in the 21st century. These strategies are based on four key elements as follows: (1) super mechanical properties that give masks flexibility, durability, and good lifetime storage;(2) high thermal properties that give masks heat self-sterilization;(3) an electric charge controller that gives masks triboelectric (TE) filtration;and (4) response to the antimicrobial effect that stays in the mask before, during, and after safe use. These properties give new-generation masks the ability to remove the drawbacks of traditional surgical masks, such as microbial growth and low filtration efficiency. The graphene family has introduced the self-sterilization and TE effects of surgical masks. Silver nanoparticles have supported antimicrobial effects. Nanofiber membranes are fabricated to have a high surface area that improves the fiber diameter and porosity ratio. A traditional mask could only block a maximum of 50% of the exhaled viruses, but a nanofiber-based mask has been tested to intercept 90% to 99% of particle viruses while breathing during use. Complex nanocomposite materials have succeeded in collecting all these advantages.
ABSTRACT
The transmission of pathogens via surfaces poses a major health problem, particularly in hospital environments. Antimicrobial surfaces can interrupt the path of spread, while photocatalytically active titanium dioxide (TiO2) nanoparticles have emerged as an additive for creating antimicrobial materials. Irradiation of such particles with ultraviolet (UV) light leads to the formation of reactive oxygen species that can inactivate bacteria. The aim of this research was to incorporate TiO2 nanoparticles into a cellulose-reinforced melamine-formaldehyde resin (MF) to obtain a photocatalytic antimicrobial thermoset, to be used, for example, for device enclosures or tableware. To this end, composites of MF with 5, 10, 15, and 20 wt% TiO2 were produced by ultrasonication and hot pressing. The incorporation of TiO2 resulted in a small decrease in tensile strength and little to no decrease in Shore D hardness, but a statistically significant decrease in the water contact angle. After 48 h of UV irradiation, a statistically significant decrease in tensile strength for samples with 0 and 10 wt% TiO2 was measured but with no statistically significant differences in Shore D hardness, although a statistically significant increase in surface hydrophilicity was measured. Accelerated methylene blue (MB) degradation was measured during a further 2.5 h of UV irradiation and MB concentrations of 12% or less could be achieved. Samples containing 0, 10, and 20 wt% TiO2 were investigated for long-term UV stability and antimicrobial activity. Fourier-transform infrared spectroscopy revealed no changes in the chemical structure of the polymer, due to the incorporation of TiO2, but changes were detected after 500 h of irradiation, indicating material degradation. Specimens pre-irradiated with UV for 48 h showed a total reduction in Escherichia coli when exposed to UV irradiation.
ABSTRACT
Over the last 10 years, the antiviral and antimicrobial activities of non-functionalised inorganic nanoparticles against different pathogens were experimentally shown. This effect has attracted the attention of scientists due to the COVID-19 pandemic;however, its mechanism is still unclear. For understanding the mechanism of nanoparticle’s action, it is important to know how this action depends on the parameters of nanoparticles and the properties of a pathogen. In the work, we have studied the action of gold nanoparticles on the viruses outside and inside the cell and compared this action with two sizes of nanoparticles and two types of viruses. The study has been conducted for adenovirus and H1N1 influenza virus, and gold nanoparticles of 5 nm and 20 nm diameter. Virucidal and antiviral actions were observed experimentally for both sizes of nanoparticles against both viruses. It has also been shown with the electron microscopy that the viruses may be destructed in 2 h after adsorption of 5 nm gold nanoparticles on their surface;and that the viruses may change their shape in 2 h after adsorption of 20 nm nanoparticles on their surface. The model of physical adsorption of nanoparticles on the virus surface due to near-field interaction was used to explain observed results.
ABSTRACT
The effects of hesperidin and different casings on pH, moisture content, water-holding capacity, and total viable count (TVC) of sausages stored for 171 days were evaluated by principal component analysis (PCA) and discriminant analysis (DA). Sausages stuffed in a modified casing with treatment B (soy lecithin concentration: 1:30, soy oil concentration: 2.5%, lactic acid concentration: 21 mL/kg NaCl [solid], treated time: 90 min) had a significantly lower pH value (6.89 ± 0.01) at d 31 but higher (6.55 ± 0.03) than that of control casings at d 171 (p < 0.05). Hesperidin plays an important role in antimicrobial property that renders the sausages with modified casing by treatment A (soy lecithin concentration: 1:27.5, soy oil concentration: 1.25%, lactic acid concentration: 19.5 mL/kg NaCl [solid], treated time: 75 min) stable (p > 0.05), with the final TVC of 5.03 ± 0.10 log cfu/g. According to the PCA results, water-holding capacity has a positive correlation to pH. Moisture content was the best discriminator for differentiating sausages with control and modified casings, whilst pH was able to discriminate sausages stored after 138 days from other days.
ABSTRACT
Due to the COVID‐19 pandemic, many rapid antimicrobial agents have developed intensively. Carbon dots (CDs), a new type of carbon‐based nanomaterials, shows great potential against emerging infectious diseases and antimicrobial‐resistant infections due to their unique optical properties, excellent biocompatibility, and easy surface modification. With the definition of the CDs structure and properties, synthesis, and characteristic technology improvement, the research on the CDs as antimicrobial agents has made significant progress. However, the lack of high repeatable and exact preparation methods, and the regular antimicrobial activity make it far from practical application. In this review, we summarize the most recent progress and challenges of CDs antimicrobial. First, an overview of the characteristics and properties is given, and the advantage of CDs applied to antimicrobial is further discussed. Then, it focuses on research progress on antimicrobial mechanisms under different conditions, the critical factors affecting their antimicrobial activity, and the practical antimicrobial applications. Finally, the main challenges and future research perspectives of antimicrobial CDs are proposed.
ABSTRACT
Background: Today, SARS-CoV-2 (COVID-19), a viral disease caused by the novel coronavirus (a tiny crowned virus), has become one of the threats for human beings all over the world and caused the death of millions of people worldwide. Many vaccines have been developed and administered to people in several countries;however, due to their propensity to create new strains, it appears that curing all corona strains will be challenging. So, it is necessary to identify the structure of the virus, mechanism of action, and its antiviral activities against drugs and other functional materials. Methods: AgNPs have unique physicochemical and antimicrobial properties. This review describes the structure and nature of the virus and the mechanism of action of an antiviral drug such as silver nanoparticles (AgNPs) with the virus. In addition, different methods for synthesis of AgNPs, application of AgNPs as an antiviral agent against influenza virus, human immuno deficiency virus (HIV), herpes simplex virus type 1 (HSV-1), hepatitis B virus (HBV), polio virus, respiratory syncytial virus (RSV), are discussed. Also, the most probable applications and properties of AgNPs that can help prepare it as an antiviral agent are discussed. Results: The use of AgNPs against various viruses, including the coronavirus family, is found to be effective;therefore, it can be considered for the development of antiviral agents, disinfectants, antiviral coated mask, and their therapeutic use against the treatment of novel coronavirus with minimum side effect and great efficiency. Conclusion: AgNPs were successfully used for the treatment of various viral diseases of the coronavirus family such as H1N1, H3N2, influenza, even for SARS and MERS coronaviruses. AgNPs coated masks, disinfectants, fabrics, wipes, and inhalation systems are effective for the inhibition of SARS-CoV-2 infection. Since sanitizers have a temporary effect, the development of some other potential alternatives having low toxicity, ease of use, long lasting efficiency, health cautiousness, minimum side effect, sustainable fabrics is required.
ABSTRACT
In the past few decades, nanotechnology has been receiving significant attention globally and is being continuously developed in various innovations for diverse applications, such as tissue engineering, biotechnology, biomedicine, textile, and food technology. Nanotechnological materials reportedly lack cell-interactive properties and are easily degraded into unfavourable products due to the presence of synthetic polymers in their structures. This is a major drawback of nanomaterials and is a cause of concern in the biomedicine field. Meanwhile, particulate systems, such as metallic nanoparticles (NPs), have captured the interest of the medical field due to their potential to inhibit the growth of microorganisms (bacteria, fungi, and viruses). Lately, researchers have shown a great interest in hydrogels in the biomedicine field due to their ability to retain and release drugs as well as to offer a moist environment. Hence, the development and innovation of hydrogel-incorporated metallic NPs from natural sources has become one of the alternative pathways for elevating the efficiency of therapeutic systems to make them highly effective and with fewer undesirable side effects. The objective of this review article is to provide insights into the latest fabricated metallic nanocomposite hydrogels and their current applications in the biomedicine field using nanotechnology and to discuss the limitations of this technology for future exploration. This article gives an overview of recent metallic nanocomposite hydrogels fabricated from bioresources, and it reviews their antimicrobial activities in facilitating the demands for their application in biomedicine. The work underlines the fabrication of various metallic nanocomposite hydrogels through the utilization of natural sources in the production of biomedical innovations, including wound healing treatment, drug delivery, scaffolds, etc. The potential of these nanocomposites in relation to their mechanical strength, antimicrobial activities, cytotoxicity, and optical properties has brought this technology into a new dimension in the biomedicine field. Finally, the limitations of metallic nanocomposite hydrogels in terms of their methods of synthesis, properties, and outlook for biomedical applications are further discussed.
ABSTRACT
Systematic disinfection of the stethoscope diaphragm is required to ensure that it does not act as a vector for cross-transmission of health-related diseases. Thus, an antimicrobial latex film could be used as a cover to inhibit pathogenic bacteria from growing on its surface. The aim of this work is to determine the antimicrobial activity and mechanical properties of antimicrobial natural rubber (NR) latex films with different types of antimicrobial agents (mangosteen peel powder (MPP), zinc oxide nanoparticles (ZnO NP), and povidone-iodine (PVP-I)). The antimicrobial loading was varied from 0.5, to 1.0, and 2.0 phr to monitor the effective inhibition of Gram-negative bacteria and fungi growth. For MPP and PVP-I antimicrobial agents, a loading of 2.0 phr showed good antimicrobial efficacy with the largest zone of inhibition. Simultaneously, ZnO NP demonstrated excellent antimicrobial activity at low concentrations. The addition of antimicrobial agents shows a comparable effect on the mechanical properties of NR latex films. In comparison to control NR latex film (29.41 MPa, 48.49 N/mm), antimicrobial-filled films have significantly greater tensile and tear strengths (MPP (33.84 MPa, 65.21 N/mm), ZnO NP (31.79 MPa, 52.77 N/mm), and PVP-I (33.25 MPa, 50.75 N/mm). In conclusion, the addition of antimicrobial agents, particularly ZnO NP, can be a better choice for NR latex films because they will serve as both an activator and an antimicrobial. In a clinical context, with regard to frequently used medical equipment such as a stethoscope, such an approach offers significant promise to aid infection control.
ABSTRACT
Flavonoid compounds are secondary plant metabolites with numerous biological activities;they naturally occur mainly in the form of glycosides. The glucosyl moiety attached to the flavonoid core makes them more stable and water-soluble. The methyl derivatives of flavonoids also show increased stability and intestinal absorption. Our study showed that such flavonoids can be obtained by combined chemical and biotechnological methods with entomopathogenic filamentous fungi as glycosylation biocatalysts. In the current paper, two flavonoids, i.e., 2′-hydroxy-4-methylchalcone and 4′-methylflavone, have been synthesized and biotransformed in the cultures of two strains of entomopathogenic filamentous fungi Isaria fumosorosea KCH J2 and Beauveria bassiana KCH J1.5. Biotransformation of 2′-hydroxy-4-methylchalcone resulted in the formation of two dihydrochalcone glucopyranoside derivatives in the culture of I. fumosorosea KCH J2 and chalcone glucopyranoside derivative in the case of B. bassiana KCH J1.5. 4′-Methylflavone was transformed in the culture of I. fumosorosea KCH J2 into four products, i.e., 4′-hydroxymethylflavone, flavone 4′-methylene-O-β-d-(4″-O-methyl)-glucopyranoside, flavone 4′-carboxylic acid, and 4′-methylflavone 3-O-β-d-(4″-O-methyl)-glucopyranoside. 4′-Methylflavone was not efficiently biotransformed in the culture of B. bassiana KCH J1.5. The computer-aided simulations based on the chemical structures of the obtained compounds showed their improved physicochemical properties and antimicrobial, anticarcinogenic, hepatoprotective, and cardioprotective potential.
ABSTRACT
There is an increasing focus in healthcare environments on combatting antimicrobial resistant infections. While bacterial infections are well reported, infections caused by fungi receive less attention, yet have a broad impact on society and can be deadly. Fungi are eukaryotes with considerable shared biology with humans, therefore limited technologies exist to combat fungal infections and hospital infrastructure is rarely designed for reducing microbial load. In this study, a novel antimicrobial surface (AMS) that is modified with the broad‐spectrum biocide chlorhexidine is reported. The surfaces are shown to kill the opportunistic fungal pathogens Candida albicans and Cryptococcus neoformans very rapidly (<15 min) and are significantly more effective than current technologies available on the commercial market, such as silver and copper.
ABSTRACT
To improve business performance and achieve sustainable development through the concept of hot spring resource reuse, this study investigated the antibacterial effect of alginate-coated tea tree essential oil microcapsules and the effect of alginate microcapsules on the release of tea tree essential oil. The results revealed that 450 μm alginate/tea tree essential oil microcapsules (containing 720 ppm of tea tree essential oil) prepared using microfluidic assemblies effectively inhibited total bacteria, Escherichia coli, and Staphylococcus aureus in hot spring water. For alginate/tea tree essential oil microcapsules prepared under different conditions, at a fixed concentration of cross-linking reagents, the release time increased with the cross-linking time (10 min > 5 min > 1 min). At a fixed cross-linking time, the release time increased with the concentrations of cross-linking reagents (1 M > 0.5 M > 0.1 M). When the concentrations of cross-linking reagents and the cross-linking time were the same, the release time of cross-linking reagents increased with the strength of metal activity (Ca > Zn).
ABSTRACT
Reduced CD73 was found to protect HIV-infected people against multiple sclerosis, and the researchers want to identify ways to manipulate the CD73 gene to turn it on in patients with HIV and off in those with multiple sclerosis. mAb neutralises hantaviruses The first human antibody to effectively neutralise two types of hantaviruses in animal models has been discovered. RSV vaccine in pregnancy reduces prescribing in infants A blinded, multicountry trial found that infants of mothers assigned a respiratory syncytial virus (RSV) fusion vaccine during pregnancy had fewer antimicrobial prescription courses over the first 90 days of life than infants of mothers assigned placebo. Unlike the unvaccinated control group, vaccinated mice remained clear of skin lesions, the number of parasites at the infection site was held at bay, and protection was sustained over 10 weeks.
ABSTRACT
The purpose of this research was to develop formulations of chewing candies (CCs) in a sustainable manner by using berry by-products in combination with antimicrobial lactic acid bacteria (LAB) strains. To implement this aim, the optimal quantities of by-products from lyophilised raspberry (Rasp) and blackcurrant (Bcur) from the juice production industry were selected. Prior to use, Lactiplantibacillus plantarum LUHS135, Liquorilactobacillus uvarum LUHS245, Lacticaseibacillus paracasei LUHS244, and Pediococcus acidilactici LUHS29 strains were multiplied in a dairy industry by-product—milk permeate (MP). The antimicrobial activity of the selected ingredients (berry by-products and LAB) was evaluated. Two texture-forming agents were tested for the CC formulations: gelatin (Gl) and agar (Ag). In addition, sugar was replaced with xylitol. The most appropriate formulation of the developed CCs according to the product’s texture, colour, total phenolic compound (TPC) content, antioxidant activity, viable LAB count during storage, overall acceptability (OA), and emotions (EMs) induced in consumers was selected. It was established that the tested LAB inhibited three pathogens out of the 11 tested, while the blackcurrant by-products inhibited all 11 tested pathogens. The highest OA was shown for the CC prepared with gelatin in addition to 5 g of Rasp and 5 g of Bcur by-products. The Rasp and LUHS135 formulation showed the highest TPC content (147.16 mg 100 g−1 d.m.), antioxidant activity (88.2%), and LAB count after 24 days of storage (6.79 log10 CFU g−1). Finally, it was concluded that Gl, Rasp and Bcur by-products, and L. plantarum LUHS135 multiplied in MP are promising ingredients for preparing CCs in a sustainable manner;the best CC formula consisted of Gl, Rasp by-products, and LUHS135 and showed the highest OA (score 9.52) and induced the highest intensity of the EM ‘happy’ (0.231).
ABSTRACT
Historically, silver has been recognized as a powerful antibacterial agent with a broad spectrum of functions, and it has been employed safely in healthcare for several years. It seems that the incorporation of silver into embedded medical devices may be advantageous when particular genetic features, including such antibacterial behavior, are needed for the device to function. According to current and prior bacterial studies, it appears that the toxicity against bacteria was significantly more significant than the toxicity against human cells. Silver nanoparticles are nanoparticles with sizes ranging between one and one hundred nanometers (nm) in size. When it comes to molecular diagnostics, therapies, and equipment that are employed in a wide range of medical procedures, silver nanoparticles have a number of unique qualities that make them very useful. The physical and chemical approaches are the two majority ways for the creation of silver nanoparticles. The challenge with chemical and physical approaches is that the synthesis is complicated and can result in harmful compounds being absorbed onto the surfaces of the materials. In order to address this, the biological technique offers a viable alternative solution. Bacteria, fungus, and plant extracts are the three principal biological systems concerned in this process. A complete overview of the mechanism of action, manufacture, and uses in the medical area, as well as the healthcare and ecological concerns that are believed to be produced by these nanoparticles, is provided in this paper. The emphasis is on the proper and effective synthesis of silver nanoparticles even while exploring their numerous promising utility and attempting to assess the current status in the debates over the toxicity concerns that these nanoparticles pose, as well as attempting to reflect the needs in the debates over the toxicity concerns that these nanoparticles pose.
ABSTRACT
(1) Background: The demand for healthy and nutritious food is growing worldwide. Fermented dairy products are highly valued by consumers for their health benefits. Kefir is a fermented dairy product that brings many benefits to the consumer due to its antioxidant, anticancer, antidiabetic, antihypertensive and antimicrobial properties. Extracts from various plants in the form of volatile oils have a beneficial efct on consumer health. Following the research, their antioxidant and antimicrobial activities were demonstrated. (2) Methods: In the present study, the main purpose was to obtain a fermented dairy product with a high nutritional value;therefore, kefir, enriched with three types of volatile oils, namely, volatile mint oil, volatile fennel oil and volatile lavender oil, was made. The kefir samples obtained were sensory and texturally analyzed. The beneficial effect on health must also be studied in terms of the acceptability of these products by consumers from a sensory point of view. A non-numerical method based on several multi-personal approval criteria was used to interpret the results obtained in the sensory analysis. In the textural analysis, the consistency, cohesiveness and firmness of the kefir samples were analyzed. (3) Results: The samples enriched with volatile oils obtained superior results compared to the control sample in both conducted examinations. Kefir samples with volatile oils retained their sensory and textural characteristics for a longer time during storage. (4) Conclusions: The volatile oils added to kefir positively influenced the sensory and textural characteristics of the finished product.